Alternate Leg ID: COST Well No. G-1
Area of Operations: southwestern Georges Bank, United States, North America, North Atlantic
Dates: April 06, 1976 to July 26, 1976
Objectives: The COST No. G-1 well was drilled between April 6 and July 26, 1976, by Ocean Production Company acting as operator for 31 participating companies. The well was drilled by the semisubmersible rig SEDCO-J in 157 ft. of water in the southwestern part of the Georges Bank basin. A total section of 16,071 ft. (4,898 m) was drilled. The COST No. G-1 well was drilled intentionally off structure in block 79 of the North Atlantic Outer Continental Shelf tract, part of Lease Sale No. 42 held in December 1979.
Type of Activity: Well drilling
Information to be derived:
Summary: A total section of 16,071 ft (4,898 m) was drilled. Well G-1 bottomed in phyllite, slate and metaquartzite overlain by weakly metamorphosed dolomite, all of Cambrian age. Data from geophysical logs and examination of conventional cores, well-cuttings, and sidewall cores show that below 10,000 ft. (3,048 m), the strata has moderate porosity and low to moderate permeability and is thus considered adequate to poor reservoir rock. Above 10,000 ft. (3,000 m), the porosity ranges from 16 to 39 percent and the permeability is highly variable, ranging from 0.01 to 7100 mD. Measurements of reflectance and various organic geochemical properties suggest that the Tertiary and Cretaceous strata are not prospective for oil and gas. These sediments have not been buried deeply enough for hydrocarbon generation and the kerogen and extractable organic matter in them are thermally immature. The Jurassic rocks at the G-1 site do contain small amounts of thermally mature gas-prone kerogens, but the site has only poor to fair oil and gas source-rock potential.
USGS Project Number: COST WELL G-1
Contact: Wylie Poag (email@example.com)
Map for Area of Operations :